 |
 |
 |
 |
 |
According to Various Soil Strata, the user
can select suitable earthing design specified by
.
Method of Utilization of our Vx-R(BLUE) complex chemical compound for reactivation of soil in existing earthing pit Exhibiting higher earthing resistance
Collect one empty barrel of 200 liters capacity. Fill with water up to ¾ part i.e. approx 150 liters. Dissolve 50 Kgs. our Vx-R(BLUE) complex (One Bag), steer the solution properly by wooden or plastic stick till the complexture is dissolved thoroughly and homogeneous liquid is prepared.
Collect one plastic tumbler and pour the above prepared solution in the existing earthing pit in the soil surrounded near by area of electrode pipe. Continue pouring the liquid till entire quantity of solution prepared in the barred is exhausted in the pit. After completing above procedure, take the measurement of electrode contact resistance with the earth after at least 10 to 12 hours, till the entire quantity is completely adsorbed with soil particles. Compare these readings with readings taken prior to soil reactivation carried out with our complexture Vx-R(BLUE). We assure you that on average 60 to 70 % reduction in electrode contact resistance will definitely be achieved. Subject to the earthing at initial stage is erected properly.
Note :
-
For mesh type earthing pit carry out 2nd cycle as suggested above as 100 Kgs. Vx-R(BLUE) complexture will be required to add in the pit.
-
For small size earthing pit having pipe and plate electrode only 50 Kgs. Vx-R(BLUE) complexture will be required